Produse pentru stomatologie în (9)

Thixotropic, structural, fibre reinforced cement mortar with high intrinsic watertightness, and extraordinary physical and mechanical characteristics: adhesion to concrete, adhesion to steel, compression resistance, flexural strength, abrasion resistance. Perfect for remediation of structural works and articles in degraded concrete and very high performance coatings. Thanks to the very high adhesion to steel and concrete supports, it is also suitable for fixing threaded bars in holes made on concrete or rock conglomerates. Apply with brick trowel and plastering trowel. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic watertightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It is fibreglass reinforced three-dimensionally, it provides high adherence and adhesion; and dimensionally stable (shrinkage-compensated). The product is mixed with water (approx. 16% of the weight of the bag). Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. For wet spritz beton operations it is advisable to use the Repar Tix HG SB mortar, which maintains the physical and mechanical characteristics of Repar Tix HG, but is specially formulated for the maximum performance of sprayer machines. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. The addition of Bond HG to the mixing water (about 0.5 litres per 25 kg bag of product) allows further improvements in terms of adherence, adhesion, watertightness, workability, moldability and deformability. For high coating thicknesses, static, monolithic requirements, etc., performed with Repar Tix HG, appropriate metal reinforcements (mesh, cages, etc.) should be used, anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2, or with the same Repar Tix HG. Approximately 18,5 kg/m² of Repar Tix HG for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre).

Set di profilassi Deep Scaling Zepf Bionik per un ottimale acccesso subgengivale.Composto da Gracey 5/6, 7/8, 11/12, 13/14, Scaler 204S e 1/3 Washtray Il set per profilassi M5 Deep Scaling di Helmut Zepf contiene 4 Curettes Gracey di diverse misure utilizzabili per prevenire la formazione di sacche di tartaro all’interno delle pareti gengivali, uno Scaler a falcetto per la rimozione della placca negli spazi interdentali dell’ area molare ed il Tray in acciaio inox dove poter riporre tutti gli strumenti. Le punte delle curettes sono tutte rivestite in Nanopal e intercambiabili, possono essere ordinate singolarmente e essere cambiate tramite le chiavi apposite(cod. 24.755.02 e cod. 24.755.03). Inoltre vengono fornite con il manico Bionik (Peek) in 10 differenti colori.

Tappeto decontaminante/ battericida a strappo con 30 fogli spellicolabili

Hi-Fiber is a line of quality, esthetical, high-performance reinforcements for dental professionals. Specially designed and made using advanced materials and patented 3D printing continuous fiber composite manufacturing technology to deliver an efficient, effective, and biocompatible way to reinforce smiles that are beautiful and long-lasting.

The product is used after regular oral hygiene (brushing and flossing).Shake it vigorously, pour it into the supplied measuring cup and take it quickly, to avoid the separation of the components. Rinse for about 30 seconds. Repeat the application twice a day, morning and evening. It is advisable not to rinse the mouth with water for at least 15 minutes after the treatment and not to take food or drinks for at least 30 minutes after the treatment.

Silicone da addizione in pasta da miscelare nel rapporto 1:1. Per mascherine, riparazioni, ecc. Disponibile in 4 durezze: 65 shore(A) (durezza medio-bassa, alta elasticità e altissima riproduzione dei dettagli), 75 shore(A) (durezza media, media elasticità, alta riproduzione dei dettagli), 85 shore(A) (durezza medio-alta, media rigidità, alta riproduzione dei dettagli), 95 shore(A) (durezza estrema, alta rigidità, alta riproduzione dei dettagli; per sostituire il gesso). - Buona lavorabilità - Ottima riproduzione dei dettagli

Il colore viola conferisce una adeguata visibilità. Utilizzo suggerito in chirurgia orale: in parodontologia nel caso di innesti connettivali e per fissare membrane riassorbibili, in tutta la chirurgia implantare, in chirurgia maxillo-facciale e orale generale. Calibri disponibili: 4/0, 5/0, 6/0. Aghi disponibili: DSM16 – Black | Ago nero 3/8 cerchio, reverse cutting premium, 16mm DSM13 – Black | Ago nero 3/8 cerchio, reverse cutting premium, 13mm DSM12 – Black | Ago nero 3/8 cerchio, reverse cutting premium, 12mm DSM10 – Black | Ago nero 3/8 cerchio, reverse cutting premium, 10mm HS18 | Ago 1/2 cerchio, reverse cutting, 18mm Confezione: 24 pezzi

Dento3 contains ozonized sunflower seed oil, named Ozonia 3000, which is produced, titrated (ISCO3 Method), standardized and stabilized by Innovares. - Low abrasiveness, pH about 7.9, peroxide index about 50 meqO2/kg. - No fluoride, sodium lauryl sulfate, alcohol, parabens. - Dermatologically and microbiologically tested. FOR MORE INFORMATION VISIT OUR WEBSITE!

Professional cleaning detergent-sanitizing action for permanent washable sticky mats. Water-based enamel with Biomaster The Coronavirus emergency has made us face an unprecedented situation, forcing us to change our habits and adopt new ones. Staying indoors for a long time has brought attention to issues such as indoor pollution, healthiness of both domestic and work environments. We talk about indoor pollution to indicate the contamination by harmful substances of closed spaces used for private, social life and at work. Starting from these considerations, we have developed three product lines to cover all needs, especially: SMALTO-SAN, a water-based enamel with Biomaster, suitable for for the most sensitive areas, such as doctors’ offices, dentists, schools and hospitals. Usually in these places the walls are painted in bands of about one meter with a normal washable enamel.